Description
INGREDIENTS:
Potassium peroxymonopersulfate…………50%
INDICATIONS:
Effective against viruses, gram-negative and gram-positive bacteria. Works well in a wide
range of temperatures. Suitable for misting with or without poultry and livestock. Non-
toxic when used. Widely used for water and sanitation.
FOR VETERINARY USE ONLY.
STORAGE:
Keep in shade cool and dry place, at room temperature.
DOSAGE AND ADMINISTRATION FOR USE:
- Surfaces/ Equipment: Pre-clean all surfaces before disinfection. Apply with a pressure washer using 250 – 300 ml per sqm for porous and 200 ml per sqm for non-porous areas. Rinse after 30 minutes.
- Routine disinfection: 1:250 (4 g per liter).
- Terminal disinfection: 1:150 (7 g per liter).
- Drinking water: 1:2000 (0.5 g per liter), pre-dissolve and add.
- Water system: 1:150 (7 g per liter), clean, fill header tank with water. Add BIO-GUARD, mix and leave for 10 minutes,then flush the whole system for 50 minutes before draining and rinsing.
- Foot and Wheel dip: 1:100 (10 g per liter), change twice weekly.
- Fogging: 1:100 (10 g per liter), use a mechanical device.General directions:Add BIO-GUARD powder to water in a clean plastic tub and mix until fully dissolved. The colour goes pink first andthen light yellow/golden on the release of biocidal power; the product is now ready to use. Make a fresh solution each
time and start from the top and work to the walls and floor.
WITHDRAWAL TIME: None.
NOTE:
- Shall be placed in a place not easily accessible to children.
- When preparing and using this product, pay attention to personal protection and avoid contact with skin and eyes. In case of inadvertent contact, immediately wash it with flowing water and seek medical advice if necessary.
- This product shall not be used for surface disinfection of metal articles.
